DIY Screen Printing on Shirts – Source and Resource

to need a screen, a squeegee, and to require a photo emulsion, squeegee, and screen. Mix the sensitizer and water with the sensitizer. Add the mix to the container. The mixture should be stirred until the color remains consistent. Pour a little onto the screen and then spread the mixture evenly by the squeeze.

Place a fan in your screen. Turn the lights off, allowing it to dry in dim light. The screen is extremely photosensitive, so it’s important to work quickly as soon as it’s dry. Print your artwork on Transparencies, then put it back onto the screen. The transparencies should be pushed down using the help of a glass piece then set a bright light over the top for at least 30 minutes. You can gently clean the surface with a spray or toothbrush.

Lay your shirt down on the screen. Then, apply one layer of screen printing ink to it. Then follow this with the squeegee. When you’re done, put a layer of film emulsion over the screen. Use water hoses to get rid of it. There is a lot of work in order to make your clothes look perfectly. You can use an old shirt to test your skills before you buy a new one.


Leave a Reply